Key Features:

✅ Nano camera – 170° FOV, 2.1 mm lens, only 3.5 g
✅ Built-in memory – 32 GB (V3) or 8 GB (V2)
✅ Recording in 1080p/60FPS or 720p/120FPS
✅ VTX with power up to 500 mW, 3.1–13V wide voltage input
✅ Total system weight only 6.8 g
✅ Canvas Mode OSD support
✅ Ultra-low latency – only 22 ms
✅ Compatible with Betaflight, iNav, KISS, Fettec, ArduPilot
✅ LHCP Polar antenna – 2 dBi gain
✅ Image ratio: switchable 16:9 and 4:3

Technical Specifications:

📷 Camera – Avatar Nano

• Sensor: 1/2.7"
• Resolutions: 1080p/60FPS, 720p/120FPS, 720p/60FPS
• Aspect ratio: 16:9 / 4:3 (switchable)
• Lens: 2.1 mm
• FOV: 170°
• Aperture: F2.0
• Shutter: Rolling
• Minimum illumination: 0.001 Lux
• Weight: 3.5 g
• Dimensions: 14×14×17 mm
• Coaxial cable: 55 mm / 90 mm

📡 VTX – Avatar Mini 1S VTX (V3)

• Frequency: 5.725–5.850 GHz
• Transmission power: up to 500 mW
• Connectors: JST1.06 (Power), JST0.84 (USB)
• Mounting holes: 25.5×25.5 mm
• Dimensions: 30×30×6.5 mm
• Weight: 6.8 g
• Storage: 8 GB (V2) / 32 GB (V3)
• Recording: 1080p / 720p
• Input voltage: 3.1–13V
• OSD: Canvas Mode
• Bitrate: 25 Mbps / 50 Mbps
• Latency: ~22 ms
• Supported systems: Betaflight, iNav, Kiss, Fettec, ArduPilot

📶 Antenna – Polar Antenna

• Polarization: LHCP
• Frequency range: 5.6–5.9 GHz
• Gain: 2 dBi
• VSWR: ≤1.4
• Connector: U.FL
• Length: 90 mm
• Weight: 1.5 g

Package Contents:

• 1× Walksnail Avatar Mini 1S Kit
• 1× 4-Pin USB Cable
• 1× 6-Pin Power Cable
• 2× M2×3/4 mm Screws
• 4× M2×16 mm Screws
• 4× M2 Nuts
• 5× 2.1×3.4×1 mm Gaskets