Drony
Producenci
- New
Cart0.00
CADDXFPV Walksnail Avatar HD Kit V2 (Dual Antennas Version)
777.77
Tax included
Walksnail Avatar HD Kit V2 (Dual Antennas Version)
1080p FPV Kit with V2 Camera – EIS, Gyroflow, 32 GB, Dual Antennas
The Walksnail Avatar HD Kit V2 (Dual Antennas Version) is a modern FPV system built for superior stability, long-range signal, and excellent image quality. The V2 camera features a native 4:3 sensor with 2K pixel resolution, offering a wider view and better framing – perfect for freestyle and racing.
The kit supports 1080p/60FPS and 720p/100FPS recording, plus compatibility with 1080p/100FPS and 120FPS via firmware. With 32 GB of built-in storage, you can record long HD sessions without interruption. The VTX features dual IPEX antennas, TVS protection, and an optimized PCB layout, delivering low latency (avg. 22 ms) and a reliable signal.
Power input from 6V to 25.2V. Fits both 20×20 mm and 25.5×25.5 mm mountings. Fully compatible with Betaflight, Inav, Fettec, ArduPilot, and Kiss.
Product Features:
✅ V2 camera with native 4:3 sensor
✅ 1080p/60FPS and 720p/100FPS recording
✅ Firmware support for 1080p/120FPS
✅ 32 GB built-in memory
✅ Gyroflow support (with 32G VTX only)
✅ Transmission latency: avg. 22 ms
✅ Dual IPEX antennas – stronger signal
✅ Transmission range: up to 4 km
✅ Aspect ratio: 4:3 and 16:9
✅ Canvas Mode OSD support
✅ Power input: 6–25.2V
📋 Technical Specifications:
📷 Camera – Avatar V2
• Sensor: 1/3.2" 4MP native 4:3
• Lens: 2.1 mm, F2.0
• FOV: 160°
• Min illumination: 0.001 Lux
• Resolution: 1080p/60FPS, 720p/100FPS
• Compatible with: 1080p/100FPS, 120FPS
• Format: MP4 (H.264), shutter: Rolling
• Weight: 7.2 g
• Dimensions: 19×19×22 mm
• Aspect ratio: native 4:3 / switchable 16:9
• Coaxial cable: 140 mm
• Gyroflow support: only with 32G VTX
📡 VTX – Avatar V2 Dual Antenna
• Frequency: 5.725–5.850 GHz
• TX Power: FCC <30 dBm; CE <14 dBm; SRRC <20 dBm; MIC <25 dBm
• Connectors: JST 4-pin (Power), JST 6-pin (USB)
• Storage: 32 GB built-in
• Recording: 1080p/720p
• Latency: avg. 22 ms
• Power input: 6V–25.2V
• Weight: 15.4 g
• Dimensions: 33.5×33.5×10.5 mm
• Mounting: 20×20 mm / 25.5×25.5 mm
• Compatibility: Betaflight, Inav, Fettec, ArduPilot, Kiss
• Channels: 8
• Operating temp: –20 to 40°C
• OSD: Canvas Mode
• Antennas: 2× IPEX
📶 Antenna – Avatar V2
• Polarization: LHCP
• Frequency range: 5600–6000 MHz
• Gain: 1.9 dBi
• VSWR: ≤1.5
• Impedance: 50Ω
• Connector: IPEX-1
• Dimensions: Ø15×45 mm
• Weight: 2 g
📦 Package Contents:
• 1× USB cable
• 1× 4PIN silicone cable
• 8× M2×4 mm screws
• 4× M2×5 mm screws
• 4× M2×6 mm screws
• 4× M2×14 mm screws
• 4× M2×5×0.5 mm washers
No customer reviews for the moment.
